Announcement
Collapse
No announcement yet.
Partner 728x90
Collapse
NinjaTrader
chart disappears in nt8 and miscellaneous
Collapse
X
-
Originally posted by NinjaTrader_JessicaP View PostHello FMTrader,
I would like to ask, has this continued through Beta 11 for you? Can you also provide the DPI for your monitor, as well as a detailed set of steps we can follow to reproduce on our end?
The monitors I am using are Dell U2412M, 1920 x 1200 resolution, pixel pitch is 0.27mm.
Simply select the standard Windows 10 option to "show tasbar on all displays"
Maximize any chart on a non primary monitor and the bottom of the chart will be partially obscurred by ther taskbar. (approx 40% of the chart tab is covered)
On the primary monitor the task bar is set to mimimum size.
If I use display fusion's multimonitor taskbar instead of the windows one I get the same result.
Whether you maximize by double clicking on the title bar versus clicking on the maximize button makes no difference to the issue.
Chart maximising on the primary monitor seems to work correctly.
Comment
-
Thank you FMTrader.
Hello tradejocky,
I would like to ask, has what you were experiencing continued through Beta 11 for you as well? Can you also provide the DPI for your monitor, as well as a detailed set of steps we can follow to reproduce on our end?Jessica P.NinjaTrader Customer Service
Comment
-
The overlap with the task bar behavior will be tracked separately from the empty chart body behavior.
If anyone has seen the empty chart body behavior happen in more recent beta versions of NT8, and can send us all of the following information, it would aid us greatly :
- DirectX version
- Processor speed and number of cores
- Available RAM
- Video card
- Monitor manufacturer, resolution, and any serial numbers available
- NT Beta version
Please do not use any third party multiple desktop software when testing. Please also, if your video card has multiple ports, try each of your ports before sending us a report.
If anyone who has already participated in this thread has observed newer beta versions correcting this behavior, please let us know this as well.Jessica P.NinjaTrader Customer Service
Comment
-
Originally posted by FMtrader View PostUPDATE
Fortunately my new monitors have arrived and I have just set all five of them up! Two each on each graphics card and one running off the internal Intel graphics.
They are all Dell U2412M monitors at 1920 x 1200 resolution.
I can confirm that the original blank chart problem consistently occurs on three of the five monitors!
Summary is as follows:
Graphics Card 1 DVI Output No 1 - No problem
Graphics Card 1 DVI Output No 2 - Problem
Graphics Card 2 DVI Output No 1 - No problem
Graphics Card 2 DVI Output No 2 - Problem
Intel Graphics HD 4000 - Problem
I have also confirmed that NT 7 does not exhibit this issue.
Hopefully this helps.
- Problem still occurs with beta 11 even with multi monitor task bars turned off.
- Have also noticed that when you maximize the chart from the remaining single task bar it actually expands to a size slighly greater than the monitor! (slight extension onto the two adjacent monitors either side)
- Graphics cards - Dual GeForce GT640 + Intel HD4000
- Direct X - Version 12
- System memory 16GB
- Processor - i7 3770K (4 core) running at 4.3 GHz
Comment
-
Thank you very much for that information, FMTrader. Can you tell us what steps within the software we can take to reproduce the blank charts on our end? These should start with booting up NinjaTrader. If you can provide workspace and template files that do not contain any custom ninjascript assemblies such as custom indicators or strategies, that would be very helpful as well.Jessica P.NinjaTrader Customer Service
Comment
-
Originally posted by NinjaTrader_JessicaP View PostThank you very much for that information, FMTrader. Can you tell us what steps within the software we can take to reproduce the blank charts on our end? These should start with booting up NinjaTrader. If you can provide workspace and template files that do not contain any custom ninjascript assemblies such as custom indicators or strategies, that would be very helpful as well.
Simply start NT8 with a blank workspace then open a basic chart and maximize it to full screen. Minimize the chart then attempt to re-maximize it by clicking on the chart name in the taskbar. Progressively move this chart from monitor to monitor repeating the minimize/maximize process. On three of my five monitors the taskbar maximize process results in the chart borders expanding to full screen but the actual chart pane is "see through". On the remaining two monitors there are no problems. The issue occurs with both the 32 bit and 64 bit beta 11 versions
Comment
-
Originally posted by NinjaTrader_JessicaP View PostHello FMTrader,
I was wondering if you could let us know whether this behavior has persisted into Beta 12?
Yes the problem still occurs with Beta 12. The problem appears to have remained unchanged through several consecutive Beta versions. I have also noticed with at least the last two beta versions that when I maximize the chart from the taskbar it actually expands to a size a few pixels wider and taller than my monitor resolution (1920 x 1200). This occurs on both the monitors where the "see through" issue occurs as well as the ones where the chart displays properly.
Comment
-
Originally posted by FMtrader View PostHi Jessica
Yes the problem still occurs with Beta 12. The problem appears to have remained unchanged through several consecutive Beta versions. I have also noticed with at least the last two beta versions that when I maximize the chart from the taskbar it actually expands to a size a few pixels wider and taller than my monitor resolution (1920 x 1200). This occurs on both the monitors where the "see through" issue occurs as well as the ones where the chart displays properly.
Still seeing exactly the same issues with RC1
Comment
-
Originally posted by FMtrader View PostHi Jessica
Yes the problem still occurs with Beta 12. The problem appears to have remained unchanged through several consecutive Beta versions. I have also noticed with at least the last two beta versions that when I maximize the chart from the taskbar it actually expands to a size a few pixels wider and taller than my monitor resolution (1920 x 1200). This occurs on both the monitors where the "see through" issue occurs as well as the ones where the chart displays properly.
Win10, non anniversary update.
Comment
-
Hello, and thank you for your report. This behavior was confirmed on our end. We will be investigating this further. Please keep an eye on the NinjaTrader 8 Release Notes page for updates and bugfixes.
Just to clarify, there are two bugs in this thread, and both have been confirmed :
- Charts can be made to overlap the task bar
- Chart bodies sometimes float
Jessica P.NinjaTrader Customer Service
Comment
Latest Posts
Collapse
Topics | Statistics | Last Post | ||
---|---|---|---|---|
Started by JohnS52, 03-22-2024, 08:06 AM
|
4 responses
27 views
0 likes
|
Last Post
by JohnS52
Today, 02:30 PM
|
||
Started by RaygunWizzle, Yesterday, 08:52 PM
|
2 responses
10 views
0 likes
|
Last Post
by RaygunWizzle
Today, 02:26 PM
|
||
Started by carnitron, 03-25-2024, 01:59 PM
|
11 responses
50 views
0 likes
|
Last Post
by carnitron
Today, 02:18 PM
|
||
Started by Gerik, 12-21-2023, 08:20 AM
|
15 responses
202 views
0 likes
|
Last Post
by Mindset
Today, 02:06 PM
|
||
Started by visvabalaji, Today, 02:04 PM
|
0 responses
4 views
0 likes
|
Last Post
by visvabalaji
Today, 02:04 PM
|
Comment