1. Selecting the Global Cross Hair cursor (or any cursor) on any Linked chart selects Global Cursors on all the charts that are linked together. This will make it easier if you have multiple charts of the same instrument and you want use the Global cursor on all the linked charts - currently it is necessary to go to each chart and turn the Global curson on/off.
2. The Global Cursor automatically scrolls all the charts with active Global cursors. Currently, if I am looking at a 30 min and a 3 min, the global cursor will reach the edge of the 3min chart as a move the cursor over the 30min chart and it is necessary to keep returning to the 3min chart to scroll it until the cursor comes into view - this makes the Global Cursor practically impossible to use. Moving the cursor on the 3 min first instead of the 30 min doesn't necessarily solve the problem because then it is neccssary to scroll through miles of bars to find the correct position on a chart - it makes more sense to position the cursor on the higher time frame chart (e.g. 30 min) first and then move to the lower timeframe (e.g. 3 min).
Thanks.
Comment