Refresh rate too high

[Sergio66]

100 ms is too high

In version 6.5 you can set it to 0

50 ms should be fine, but 100ms is too high, cuz the chart is behind the DOM

[NinjaTrader_RyanO]

Hi Sergio66,

Thank you for your post.

Within the general chart properties you can modify the refresh rate, but the quicker the refresh rate can result in general performance, and so you will want to review the performance tips at the following link as it relates to these kinds of settings.

http://www.ninjatrader.com/support/helpGuides/nt7/index.html?performance_tips2.htm

[Sergio66]

Hi Sergio66,

Thank you for your post.

Within the general chart properties you can modify the refresh rate, but the quicker the refresh rate can result in general performance, and so you will want to review the performance tips at the following link as it relates to these kinds of settings.
http://www.ninjatrader.com/support/h...ance_tips2.htm

The lowest refresh rate in NT7 is 100 ms
You simply can't go lower, and i would go at least to 50 ms

[NinjaTrader_Kyle]

Hello Sergio66,

This property is, as you've found, limited to 100 as the lowest setting. This limitation was put in to place within NinjaTrader 7 as a means to prevent users from causing performance issues. That said, I do understand the value to you of this setting. A change here is on development's list of future considerations, but there's no word on when or if that change may be put in to place.