MarketAnalyser Problems

[spooz2]

See attached image:

1. cell conditions applied and working on columns "Net" and "Net%."
same cell conditions applied to column "Last" not working.

2. Two operative connections: CQG and IQ Feed.
Disconnecting IQ feed results in only eminis updating.
Disconnecting CQG results in only AMZN>NFLX updating.
Ergo, require both feeds connected for all instruments to update.
Why doesn't CQG which feeds my charts & order entry update
all items in MarketAnalyser?

3. ^DJIA does not update under any circumstance???

[NinjaTrader_ChelseaB]

Hello spooz2,

Using Net and Net% provide two different values. Using the same condition on both will not produce the same results as the values are different.

What conditions are you using that you would expect the same result from?
May we have a screenshot of these?

CQG/Continuum provides data for futures only.
IQFeed/Kinetick provides data for equities, futures, and forex.

Below is a link to the help guide on Historical & Real-Time Data. In the section 'Understanding the data provided by your connectivity provider' there is a chart that show the supported connection technologies and the types of data these connections support.

http://www.ninjatrader.com/support/helpGuides/nt7/historical_data.htm

Who are you connected to first, IQFeed or CQG?
If you are connected to CQG first, and IQFeed second, is index data enabled for the connection?
For the first connected connection, have you subscribed to real-time index data?
Index data will only update if you have subscribed to real-time data for indexes.

[spooz2]

MarketAnalyser Problem

Chelsea,

Regarding my citation of columns labeled "Net" and "Net%" you are answering a question I did not raise. I thought I clearly stated the identical cell conditions that I applied to both (changing colors when > 0 and when < 0) work as intended, but does not work when applied to the "Last" column. The image previously attached visualizes the problem.

Your information re: data feeds is helpful.

Thanks.

[NinjaTrader_ChelseaB]

Hello spooz2,

I've misunderstood your inquiry.

The cell condition is not working on the Last column that is working on other columns, is this correct?

May I have a screenshot of the cell condition applied to the Last column?

[spooz2]

MarketAnalyser Problem

Chelsea,

Low and behold! I went to take a snapshot of the cell conditions for the "Last" column and discovered that it now works.

How do I activate Indices so I can update ^DJIA?

TIA

[NinjaTrader_ChelseaB]

Hello TIA,

You will need to contact your broker or data provider and request to subscribe to index data.

For CQG/Continuum connections you will also need to enable index data in the account connection information.

Tools -> Account Connections... -> select the connection -> click Change...
Click Next twice times to advance to the account information page
Check the box to enable 'Include index data' -> click Next until Finish -> click Finish