No symbols for debug . visual studio 2013.

[doron]

Hi

I use NT8 B14

This is the first time I tried to debug with visual studio 2013 in this new version of NT.

I activated debug mode many times before without any problem.

This time as I add a break point I get the following message :
"The break point will not currently be hit. No symbols have been loaded for this document"

I tried already " Clean solution" followed by "rebuild solution"

I checked properties of solution but all looks ok to me.

Can you help ?

[NinjaTrader_JessicaP]

Hello Doron, and thank you for your report.

Since this has come up before, and there are many things that could be causing this that are difficult to narrow down, I have prepared a short video to simplify things and narrow down what could be occurring.

Could you watch this video and follow along with the steps, and let me know the furthest step you are able to reach?

http://screencast.com/t/hOcyzGOW

Thanks in advance, this information will make it much easier to isolate what is occurring.

[doron]

hi

it appears that this event is part of what i reported here :

http://ninjatrader.com/support/forum/showthread.php?t=90474

in the post i mentioned that for some reason part of my setting to NT were erased.

now i found that the debug mode was not set . This is why i had no symbols.

I send you my log and trace as i was requested in the post but i was not informed on any findings.

[NinjaTrader_JessicaP]

Thank you for this information Doron, this will help us narrow down what is occurring. I would like to ask, are you able to set aside time to go through the steps in the above video?

Here is the script I prepared for myself, for reference.

Hello, this is Jess from NinjaTrader, and a few people have had a message come up that says "The break point will not currently be hit. No symbols have been loaded for this document". Since there are a lot of things that could cause this, and it is difficult to narrow down, I have prepared a short video to help us track down what is happening. I would like to ask if you could follow along, and remember the step where something I am doing is not working the same way for you. Thanks a lot. So let's get started...

Step 1 : New -> NinjaScript Editor
Step 2 : Double click SMA
Step 3 : Save SMA -> BreakpointTest
Step 4 : Compile Breakpoint test
Step 5 : Debug mode
Step 6 : Visual Studio open
Step 7 : Add breakpoints
Step 8 : Attach BreakpointTest to a chart
Step 9 : Attach Visual Studio to process
Step 10 : Reach breakpoint in code

[doron]

hi
As i mentioned the reason it did not work was that the debug mode was not set.

It was set before but this setting (i.e. debug mode) was erased somehow.

Just as other settings were erased somehow (on the same day).

The important thing is how that can happen.

[NinjaTrader_JessicaP]

My misunderstanding. I am glad your debugger is working correctly. I am reviewing our workspace settings and your report to try to reproduce the debug mode setting becoming unchecked. I will keep you up to date with my findings.