Indicator stopped working

[Taggart]

The attached indicator when run with GomCD as the input series no longer works (constant zero value). Can someone please help?
I did get an error in the log: "Error on calling 'OnBarUpdate' method for indicator 'Volatility Switch' on bar 1. The code includes
if (CurrentBar < 1) return; which I thought was meant to prevent that error.

It worked fine yesterday.

[NinjaTrader_PatrickH]

Hello Taggart,

Thank you for your post.

The Int LookBack by default goes back 21, so you will need to increase the CurrentBar check:

if(CurrentBar < LookBack)
return;

For information on making sure you have enough bars before accessing them please visit the following link: http://www.ninjatrader.com/support/f...ead.php?t=3170

Please let me know if I may be of further assistance.

[Taggart]

I made the change in the code but no improvement with the output. Still constant zero. Is there something else that could cause this to suddenly stop working?


Edit: I should mention that all other Gom indicators that I am using are working fine and are as normal.

[NinjaTrader_PatrickH]

Hello Taggart,

Thank you for your response.

Are you still seeing errors in your Log tab? If so, what do these errors report?

I look forward to your response.

[Taggart]

There is just one error listed in the log and it was from about an hour ago.

[NinjaTrader_PatrickH]

Hello Taggart,

Thank you for your response.

I am able to see values other than 0 when using the GomCD as the input series for the VolatilitySwitch.

So I may investigate this matter further please answer the following questions.

What version of NinjaTrader are you using? You can check under Help -> About (Example: 7.0.1000.X)

Who are you connected to? This is displayed by green on lower left corner of the Control Center window.

What instrument(s) have you selected? If a futures instrument, what expiry is selected? (Example: ES 06-13)

What interval is selected for your chart(s)? (Example: Tick, Minute, Day, etc.)

I look forward to your response.

[Taggart]

Thanks a bunch for your help.

Ninja 7.0.1000.12
Connected to Zen- Fire
Instrument CL 06-13
Chart - 2 Better Renko

I have tried it on another instrument and on minute/second charts with the same result.

[NinjaTrader_PatrickH]

Hello Taggart,

Thank you for that information.

Please take a screenshot of the chart and attach it to your response.

I look forward to your response.

[Taggart]

The gom recorder is set to millisec which I have not had problems with before.

[NinjaTrader_PatrickH]

Hello Taggart,

Thank you for your response.

To confirm you see this on Minute bars as well?

[Taggart]

I just tried it again on a minute chart and it worked. I definitely tried that before and it didn't. It still won't work on a better renko chart even though it did yesterday. Any ideas?

[NinjaTrader_PatrickH]

Hello Taggart,

Thank you for your response.

I would like to schedule a support call with you tomorrow if possible to investigate this item on your PC.

Please send the following information to support[at]ninjatrader[dot]com with 'ATTN: Patrick - 845135' in the subject line and a refernece to this thread in the body of the e-mail: http://www.ninjatrader.com/support/f...ad.php?t=57815

• A phone number where you can be reached
• A time window where I can call you (please include a time zone)
• Launch our remote support application from the following link, http://www.ninjatrader.com/remotesupport. Once launched, the application will provide you with an ID# and password. I will need these from you once I have you on the phone.

I look forward to our support call.