Please help me to fix this indicator script

[fragalles]

did you got the indicator to work properly?

on this thread they also had the same issue

http://www.ninjatrader-support.com/vb/showthread.php?t=5801&highlight=camarilla

if you have an updated version, i would welcome it if you can share it here

Thanks for your suggestion. I'll add it to the list of future considerations....

I'm still on hour 1 of 'Teach Yourself Visual C# in 24 hours", but I'll give it a shot!

[Elliott Wave]

If you feel inclined maybe you could try your own hand at it? I suggest you check the Control Center logs to look for any errors.

Thanks for your suggestion. I'll add it to the list of future considerations....

I'm still on hour 1 of 'Teach Yourself Visual C# in 24 hours", but I'll give it a shot!

[NinjaTrader_JoshP]

If you feel inclined maybe you could try your own hand at it? I suggest you check the Control Center logs to look for any errors.

[Elliott Wave]

Yes, nothing plotted.

[NinjaTrader_JoshP]

Have you tried intrader's version?

[Elliott Wave]

Ok hopefully someone will get a chance to look at it.

I'm mostly interested as I believe this is the type of pivot point calculations used by Peter Bain's system (forex mentor).

[NinjaTrader_JoshP]

Based on the previous comments, the indicator most likely will need some updates.

[Elliott Wave]

Bump...

Does this work for anybody?

[Elliott Wave]

Does this still work for anybody?

I just imported it and it doesn't seem to plot.

[intrader]

Here it is!

[amenlo9]

Yes, it did help and worked! Thank you very much PrTester! I appreciate you
going through the code and pin pointing the problem.

hi,can you share your working Camarilla indicator?thanks

[intrader]

Check in your "#region Variables" section this Line
private SolidBrush[] brushes

you need to add 4 more brushes. Hope that help

Regards

Yes, it did help and worked! Thank you very much PrTester! I appreciate you
going through the code and pin pointing the problem.

[PrTester]

The attached script is for drawing the Camarilla pivot lines which I developed based on the script for Ninja provided indicator "Pivots". It doesn't work and I couldn't find anything wrong with it. Please help me to fix it. Thank you.

Check in your "#region Variables" section this Line
private SolidBrush[] brushes

you need to add 4 more brushes. Hope that help

Regards

[NinjaTrader_JoshP]

Unfortunately we cannot provide individual coding support. You will need to debug your code. Please check out this tip: http://www.ninjatrader-support.com/v...ead.php?t=3418

[intrader]

The attached script is for drawing the Camarilla pivot lines which I developed based on the script for Ninja provided indicator "Pivots". It doesn't work and I couldn't find anything wrong with it. Please help me to fix it. Thank you.