MA Different readings

[SeanSnax]

Hi,
I have script files running in Ninja and on 2 PCs, I am having issues with my MA giving a signal on one system and not the other, I have checked all the parameter settings and both the same,

Also I just copied the workspace from 1 PC that I know is giving correct signals over to the other, and same problem exists, attached are the MAs.

Reading should be 1 in the both columns,

Any ideas,
Thanks.

[NinjaTrader_Matthew]

Hello,

Can you post two screen shots of the Indicator column settings for both of these columns?

Thanks in advance

[SeanSnax]

Attached are column settings from my PC and Laptop

[NinjaTrader_Jason]

Hello SeanSnax,

Thank you for posting the screenshots.

Can you please right click in the Market Analyzer and select 'Properties'. Check if both use the same setting for 'Session template' and '# of bars to look back'.

Could it be you connect to different data feeds on the 2 PC's? Do you see difference in data if you create charts on both PC's for the instrument in question.

[SeanSnax]

Done

Hi Jason,
I hav done these checks and all seem fine in the properties window, I use same feed and same price data on charts when Loaded.

[NinjaTrader_Jason]

Do you see different values if you apply a default indicator such as an SMA with the same settings in the Market Analyzers?

Could it be the code of the indicator is different on each PC?

[SeanSnax]

Same price/code

Same data on both when I load the sma,

The code should be fine as I upgraded them both with the same code

[NinjaTrader_Matthew]

Seansnax,

To clarify, the code for both SS1 and SS3 is exactly the same? These are two separate instances of the same exact indicator?

What happens when you set both columns to use SS1 or SS3?

[SeanSnax]

Hi,
Couldn't reply to your last message till now, I need to go back a step, the code on both PCs are the same, not the way i originally replied as both codes for SS1 and SS3 were the same.

Not sure what you mean by your question below.

'What happens when you set both columns to use SS1 or SS3?

[NinjaTrader_Matthew]

Hello,

Sorry - I was asking if you set two columns to the same exact indicator if you see the same output value, or if there is a discrepancy here as well.

[SeanSnax]

Set to same indicators, I have noticed that another strategy is not updating in the analyzer but the chart is fine, it seems that the data is not been populated back from the chart to the analyzer or there is a serious time delay.