Ninjatrader & eSignal & Oslo Børs

[solversen]

Hello!

I have NT7 connected to the eSignal datafeed (green "eSignal connected in the bottom left corner). I subscribe to NASDAQ and Oslo Børs stocks with eSignal (and this works in within their software).

I need help with how to go further, and access stocks from Oslo Børs, like STL, NHY, IGE. I guess I have to add instruments in the instruments manager, but what to write?

Greetings,
Ronny

[NinjaTrader_Jason]

Hello Ronny,

NinjaTrader comes pre-loaded with the most commonly traded instruments however, you may find the need to add an additional instrument. Please follow the instructions below to add an instrument in the Instrument Manager.

•From the NinjaTrader Control Center window select the menu Tools > Instrument Manager
•Press the "New" button
•Enter in instrument specific information and select the appropriate exchange (add Default exchange for equities in addition to the actual exchange). Can you please try the Ose exchange for stocks on the Oso Børs.
•Fill in any relevant information under the "Misc" tab such as symbol mapping for your target connectivity provider (STL, NHY, IGE)
•Press the "OK" button

The instrument is now added to the master instrument list. Please follow the instructions below if you want to add this instrument to an instrument list.

•Select the instrument list you wish to add the instrument to via the "Instrument lists" drop down list in the upper left hand corner
•Select the exchange (Default recommend for equities) as this will route orders to your broker smart routing system
•Select the appropriate expiration date if this is a futures instrument
•Press the "<" button to add the instrument to the list

You are now complete and can press the "OK" button.

[solversen]

Thank you very much, it's working!

But it's too slow updating the charts, several minutes actually. I have to right click and select reload, and it's not right always then either. Is this an option somewhere?

Ronny

[NinjaTrader_Jason]

Good to hear you can load data.

How many charts do you have opened in total? Does data update without delay when you close some charts?

There is an option that determines the update interval of the chart. Can you please right click in the chart and select 'Properties'. Check what value is entered for 'Display update interval (sec)'. The default value is 0.5 and should not cause any delay.

If the issue remains, please see the tips and suggestions at the link below to improve the performance of NinjaTrader.

http://www.ninjatrader.com/support/helpGuides/nt7/performance_tips2.htm