jtrealstats (level II/Tick Volume indicator )with market replay

[Theo Heine]

Hello,

Can anyone tell me how to use jtrealstats (level II/Tick Volume indicator) with market replay? The indicator disappears as soon as I start the replay.

Thank you,

Theo.

[NinjaTrader_PatrickH]

Hello Theo,

Thank you for your post and welcome to the NinjaTrader Support Forum!

I am not familiar with this indicator, however if you check the Log tab of the NinjaTrader Control Center after applying the indicator to the chart in Market Replay do you see any errors? If so, what do these errors report?

I look forward to your response.

[Theo Heine]

Hello Patrick,

I have found a similar thread on this issue here:

http://www.ninjatrader.com/support/f...+market+replay

Can you tell me if the problem has been solved and if yes how?

Thanks

Theo

[NinjaTrader_PatrickH]

Hello Theo,

Thank you for your response.

If you check the Log tab of the NinjaTrader Control Center after applying the indicator to the chart in Market Replay do you see any errors? If so, what do these errors report?

[Theo Heine]

Well, like in the thread I mentioned I also get the report:

Error on calling 'OnMarketDepth' method for indicator 'jtRealStats7': You are accessing an index with a value that is invalid since its out of range. I.E accessing a series [barsAgo] with a value of 5 when there are only 4 bars on the chart.

To save time and effort please do take a look at this thread:

http://www.ninjatrader.com/support/f...+market+replay

Hopefully you can tell me if the problem has been solved for this trader and if yes how?

Thank you.

[NinjaTrader_PatrickH]

Hello Theo,

Thank you for your response.

That error is in regards to the number of bars loaded versus the barsAgo index the indicator is accessing. For more information please visit the following link: http://www.ninjatrader.com/support/f...ead.php?t=3170

We do not have information on this indicator, I recommend contacting the developer for further information on this indicator.

[NinjaTrader_PatrickH]

Hello Theo,

Thank you for your patience.

I have been working with this indicator and it requires Level II data. Have you downloaded Level II data when downloading Market Replay Data?

Please go to the NinjaTrader Control Center > disconnect from any data feed providers > select File > Utilities > Download Replay Data > select the Instrument > select the L1 and L2 data to download for the date. Once complete please download the data and then replay tat date for the instrument with the jtrealstats indicator enabled.