I have 1 minute charts of FDAX and CL and I have the bar timer indicator. The problem is that it doesn't work properly. It freezes during some seconds, sometimes during 3 seconds, 5 seconds even 12 seconds. And also I have notice that not all the seconds last de same time. And a lot of times when it arrives at 0 instead of starting from 59 it suddenly remains at 0 and the restarts at 56, or 50 or 45, etc... it depends.
I have looked up through this forum and found some threats about this issue. So I have done what it is suggested in some of them:
"Please use the steps below to change your Time Zone and sync the PC clock, note to set the server to time.nist.gov.
You can sync your PC clock by double clicking on the clock in the lower right corner of your desktop. Press 'Change time zone...' Set the Time zone and press 'OK'.
Once you have done that, click on Internet Time tab set the server to time.nist.gov and then click Update. Your PC clock should now be updated. "
But this have not solve my problem. I am running NT7 and the PC configuration is:
Win7 Professional 64 bits
Inte core i7 @2.5 GHz
Ram 16 Gb
I have looked up through this forum and found some threats about this issue. So I have done what it is suggested in some of them:
"Please use the steps below to change your Time Zone and sync the PC clock, note to set the server to time.nist.gov.
You can sync your PC clock by double clicking on the clock in the lower right corner of your desktop. Press 'Change time zone...' Set the Time zone and press 'OK'.
Once you have done that, click on Internet Time tab set the server to time.nist.gov and then click Update. Your PC clock should now be updated. "
But this have not solve my problem. I am running NT7 and the PC configuration is:
Win7 Professional 64 bits
Inte core i7 @2.5 GHz
Ram 16 Gb
Comment