setting alarm alert

[MoreYummy]

Hi,

When I setup the alarm alert using the alert1 in the NT's folder, what setting would do the folllowing: keep doing this alarm sound unstop until I tell it stop.

In the setting, there is a Rearm seconds, is it how many second after first sound the alarm will sound again?

[NinjaTrader_Jessica]

There is not a way to keep it ringing and the re-arm just lets you set a time until the alert can be triggered again.

[MoreYummy]

Is this re-arm = re-alarm?

How long will it keep alarming?

If I set it to 1 in the rearm setting, is it going to re-alarm every 1 second in that specific bar?

[NinjaTrader_Jessica]

That is correct. If you set this to one second the alarm will reset and trigger again as soon as the conditions for the alarm are met again.

[MoreYummy]

Can I set it to alarm at a number of times when the conditions are met each time? Not just alarm again when the conditions are met second, third.. etc times.

Is it possible?

Thanks.

[NinjaTrader_Jason]

Unfortunately, this is not supported. You could consider a custom sound file that plays a sound that suits your purpose.

The best way to check if the conditions are met as frequent as possible is by setting it to one second as my colleague Jessica mentioned.