Hello all,
After quite a while I have returned to trading. While I am waiting for my funds to arrive and my regular datafeed to be setup I re-sisgned with IQFeed to do some testing. Now that I have the IQFeed trial (with CME minis) I have a big problem with NT8.
Whenever I try to load a chart I get a ton of always the same error messages in my log, the loading never stops and my computer memory runs completely full and brings NT8 to a complete stop, only killing NT via taskmanager helps.
I already reset my instruments lists, first repaired, then rebuild/cleaned my NT database, but nothing helped. I tried the latest IQFeed connector (stable version) as well as the newer beta connector. Also I tried the latest NT8 and also one older version. Nothing did the trick.
Also I should add:that SuperDOM just works fine, so data is coming in.
In my trace.log I see this:
2020-11-14 10:53:29:870 (My IQFeed) Cbi.Connection.ConnectionStatusCallback: autoClosePositionTime='11/10/2020 00:00:00' autoClosePosition=False
2020-11-14 10:53:30:040 (My IQFeed) NinjaTrader.Gui.ControlCenter.OnConnectionStatus: Dtn status=Connected priceStatus=Connected previousStatus=Connecting previousPriceStatus=Connecting errorCode=NoError nativeError=''
2020-11-14 10:53:30:041 (My IQFeed) NinjaTrader.Gui.ControlCenter.OnConnectionStatus.D ispatcherInvoke: Dtn status=Connected priceStatus=Connected previousStatus=Connecting previousPriceStatus=Connecting errorCode=NoError nativeError=''
2020-11-14 10:53:30:041 (My IQFeed) Gui.ControlCenter.OnConnectionStatus.Adding: provider=Dtn status=Connected priceStatus=Connected
2020-11-14 10:53:30:046 (My IQFeed) IQFeed.Adapter.MessageLoopAdmin0: msg='S,CURRENT PROTOCOL,6.1, '
2020-11-14 10:53:30:052 NinjaTrader.Gui.ControlCenter.OnConnectionStatus: foundPriceLoss=False foundTradeLoss=False foundConnectingStatus=False foundConnected=True
2020-11-14 10:53:30:052 NinjaTrader.Gui.ControlCenter.OnConnectionStatus: Status=Connected
2020-11-14 10:53:30:084 (My IQFeed) IQFeed.Adapter.MessageLoopFeedL2.S: msg='S,CURRENT PROTOCOL,6.1, '
2020-11-14 10:53:30:084 (My IQFeed) IQFeed.Adapter.MessageLoopLevel1.S: msg='S,CURRENT PROTOCOL,6.1,'
2020-11-14 10:53:30:084 (My IQFeed) IQFeed.Adapter.MessageLoopLevel1.S: msg='S,CURRENT UPDATE FIELDNAMES,Symbol,Most Recent Trade,Most Recent Trade Size,Most Recent Trade Time,Most Recent Trade Market Center,Total Volume,Bid,Bid Size,Ask,Ask Size,Open,High,Low,Close,Message Contents,Most Recent Trade Conditions'
2020-11-14 10:53:30:084 (My IQFeed) IQFeed.Adapter.MessageLoopLevel1.S: msg='S,CURRENT UPDATE FIELDNAMES,Symbol,Total Volume,High,Low,Open,Close,Bid,Ask,Bid Size,Ask Size,Most Recent Trade Date,Most Recent Trade Time,Most Recent Trade,Most Recent Trade Size,Settle,Delay,Open Interest,Message Contents,VWAP'
2020-11-14 10:53:30:092 Cbi.Instrument.RequestBars (to Provider): instrument='MES 12-20' from='13.11.2020 00:00:00' to='15.11.2020 00:00:00' period='Daily'
2020-11-14 10:53:30:107 ERROR: IQFeed.Adapter.BarsWorker msg='Server: WebSocket++/0.7.0 ': Input string was not in a correct format.
2020-11-14 10:53:30:108 ERROR: IQFeed.Adapter.BarsWorker msg='Server: WebSocket++/0.7.0 ': Input string was not in a correct format.
2020-11-14 10:53:30:108 ERROR: IQFeed.Adapter.BarsWorker msg='Server: WebSocket++/0.7.0 ': Input string was not in a correct format.
2020-11-14 10:53:30:108 ERROR: IQFeed.Adapter.BarsWorker msg='Server: WebSocket++/0.7.0 ': Input string was not in a correct format.
And this last error message is what keeps coming, my trace logs and also regular logs keep filling (several GBs, it won't stop) until I kill the NT trask via taskmanager. Besides this last error entry I can't see any other entries which would give me a hint.
Does anybody experienced this as well? Does anybody here have any idea?
Thanks a lot and best regards,
Oliver
After quite a while I have returned to trading. While I am waiting for my funds to arrive and my regular datafeed to be setup I re-sisgned with IQFeed to do some testing. Now that I have the IQFeed trial (with CME minis) I have a big problem with NT8.
Whenever I try to load a chart I get a ton of always the same error messages in my log, the loading never stops and my computer memory runs completely full and brings NT8 to a complete stop, only killing NT via taskmanager helps.
I already reset my instruments lists, first repaired, then rebuild/cleaned my NT database, but nothing helped. I tried the latest IQFeed connector (stable version) as well as the newer beta connector. Also I tried the latest NT8 and also one older version. Nothing did the trick.
Also I should add:that SuperDOM just works fine, so data is coming in.
In my trace.log I see this:
2020-11-14 10:53:29:870 (My IQFeed) Cbi.Connection.ConnectionStatusCallback: autoClosePositionTime='11/10/2020 00:00:00' autoClosePosition=False
2020-11-14 10:53:30:040 (My IQFeed) NinjaTrader.Gui.ControlCenter.OnConnectionStatus: Dtn status=Connected priceStatus=Connected previousStatus=Connecting previousPriceStatus=Connecting errorCode=NoError nativeError=''
2020-11-14 10:53:30:041 (My IQFeed) NinjaTrader.Gui.ControlCenter.OnConnectionStatus.D ispatcherInvoke: Dtn status=Connected priceStatus=Connected previousStatus=Connecting previousPriceStatus=Connecting errorCode=NoError nativeError=''
2020-11-14 10:53:30:041 (My IQFeed) Gui.ControlCenter.OnConnectionStatus.Adding: provider=Dtn status=Connected priceStatus=Connected
2020-11-14 10:53:30:046 (My IQFeed) IQFeed.Adapter.MessageLoopAdmin0: msg='S,CURRENT PROTOCOL,6.1, '
2020-11-14 10:53:30:052 NinjaTrader.Gui.ControlCenter.OnConnectionStatus: foundPriceLoss=False foundTradeLoss=False foundConnectingStatus=False foundConnected=True
2020-11-14 10:53:30:052 NinjaTrader.Gui.ControlCenter.OnConnectionStatus: Status=Connected
2020-11-14 10:53:30:084 (My IQFeed) IQFeed.Adapter.MessageLoopFeedL2.S: msg='S,CURRENT PROTOCOL,6.1, '
2020-11-14 10:53:30:084 (My IQFeed) IQFeed.Adapter.MessageLoopLevel1.S: msg='S,CURRENT PROTOCOL,6.1,'
2020-11-14 10:53:30:084 (My IQFeed) IQFeed.Adapter.MessageLoopLevel1.S: msg='S,CURRENT UPDATE FIELDNAMES,Symbol,Most Recent Trade,Most Recent Trade Size,Most Recent Trade Time,Most Recent Trade Market Center,Total Volume,Bid,Bid Size,Ask,Ask Size,Open,High,Low,Close,Message Contents,Most Recent Trade Conditions'
2020-11-14 10:53:30:084 (My IQFeed) IQFeed.Adapter.MessageLoopLevel1.S: msg='S,CURRENT UPDATE FIELDNAMES,Symbol,Total Volume,High,Low,Open,Close,Bid,Ask,Bid Size,Ask Size,Most Recent Trade Date,Most Recent Trade Time,Most Recent Trade,Most Recent Trade Size,Settle,Delay,Open Interest,Message Contents,VWAP'
2020-11-14 10:53:30:092 Cbi.Instrument.RequestBars (to Provider): instrument='MES 12-20' from='13.11.2020 00:00:00' to='15.11.2020 00:00:00' period='Daily'
2020-11-14 10:53:30:107 ERROR: IQFeed.Adapter.BarsWorker msg='Server: WebSocket++/0.7.0 ': Input string was not in a correct format.
2020-11-14 10:53:30:108 ERROR: IQFeed.Adapter.BarsWorker msg='Server: WebSocket++/0.7.0 ': Input string was not in a correct format.
2020-11-14 10:53:30:108 ERROR: IQFeed.Adapter.BarsWorker msg='Server: WebSocket++/0.7.0 ': Input string was not in a correct format.
2020-11-14 10:53:30:108 ERROR: IQFeed.Adapter.BarsWorker msg='Server: WebSocket++/0.7.0 ': Input string was not in a correct format.
And this last error message is what keeps coming, my trace logs and also regular logs keep filling (several GBs, it won't stop) until I kill the NT trask via taskmanager. Besides this last error entry I can't see any other entries which would give me a hint.
Does anybody experienced this as well? Does anybody here have any idea?
Thanks a lot and best regards,
Oliver
Comment