Adding trailing stop to secondary data series

[NinjaTrader_PaulH]

Hello

Thanks for your reply.

It appears you are working with my colleague Alan on the very same subject on https://ninjatrader.com/support/foru...ng-on-strategy Please do not engage us on the same subject in multiple threads to avoid confusion, thanks for your understanding.

[murraym324]

Hello,

Im having some troubles with this script. When backtesting, selecting NQ 3000 tick bars as the primary series, I am seeing the following discrepancies.

First, the maximum loss is $50. This is not possible considering my initial stop is placed 20 ticks below entry, which is $100 on NQ.
Additionally, the avg time in market in -9.63 min. Im not sure how this can be a negative value.

Ive made sure all of my entry logic is placed under BarsInProgress == 0
While my exit strategy is under BarsInProgress == 1

Ive attached the script for reference.

[murraym324]

Thank you for that insight.. Your solution worked smoothly. Appreciate your time.

[NinjaTrader_PaulH]

Hello murraym324,

Thanks for your post.

You can create your own trailing stop in code that can be adjusted on every tick of the secondary series.
To accomplish this, you would need to segment your code by BarsInProgress and use the advanced order method overloads.
In general terms it would be something like:

if (BarsInProgress == 0)
{
if (your entry conditions long)
{
EnterLong(0,1, "Long")
}

// same for short side
}

if (BarsInProgress == 1)
{
if (Positions[0].MarketPosition == MarketPosition.Long)
{
// your code to first set an initial stop using ExitLongStopMarket(0, true, 1, Positions[0]AveragePrice - 20 * TickSize, "Long","") (or limit if you prefer)
}
//same concept for the short side

You would use bool values so that you only set the initial stop once then your code would need to compare the current price (Closes[0][0] to Positions[0].AveragePrice - 20*TickSize to decide if and when to adjust the stop order.


Below is detailed level of code to help you see this:

The control bool variables are firstTime (initially true) and setBE(initially false). These would need to be reset before placing the next entry order.

An initial stop is set first, then when price is at entry price plus 10 ticks the stop is moved to the entry price (Breakeven), next the stop is moved up 1 tick for every 5 ticks of profit.

I've included print statements to help see what is happening in each section.

if (BarsInProgress == 1 && Positions[0].MarketPosition == MarketPosition.Long)
{
if (firstTime)
{
Print (Times[0][0]+" firstTime"+" Init stop at: "+(Positions[0].AveragePrice - 20 * TickSize).ToString());
ExitLongStopMarket(0, true, 1, Positions[0].AveragePrice - 20 * TickSize, "","Long");
firstTime = false;
}

if (!firstTime && !setBE)
{
if (Closes[0][0] >= Positions[0].AveragePrice + 10 * TickSize);
{
Print (Times[0][0]+ " set BE");
ExitLongStopMarket(0, true, 1, Positions[0].AveragePrice, "","Long");
setBE = true;
stopLevel = Positions[0].AveragePrice;
}
}
if (!firstTime && setBE)
{
if (Closes[0][0] > stopLevel + 5 * TickSize)
{
Print (Times[0][0] + " adjusting stop to: "+stopLevel);
stopLevel = stopLevel + 1 * TickSize; // increment 5 to 1
ExitLongStopMarket(0, true, 1, stopLevel, "","Long");
}
}
}

Please note this example code is provided as is and has not been tested and is intended as an educational example only.

References:

https://ninjatrader.com/support/helpGuides/nt8/en-us/?enterlong.htm

https://ninjatrader.com/support/helpGuides/nt8/en-us/?exitlongstopmarket.htm

https://ninjatrader.com/support/helpGuides/nt8/en-us/?positions.htm

https://ninjatrader.com/support/helpGuides/nt8/en-us/?print.htm

[murraym324]

Hello,

I have a relatively simple strategy that I am backtesting, and would like to produce the most accurate results using tick data exits.

I understand it is necessary to add a secondary data series for intrabar granularity, Im just having trouble doing so.

My primary data series is NQ futures 400 tick bars.
My secondary data series is NQ futures 1 tick data.

If possible, I would like to enter conditionally on the primary data series, so once a 400 tick bar closes, meeting my conditions, I will enter long on the open of the following bar. This is a non issue.

However, when trailing out of my position, I would like to set my trail stop according to the secondary data series, tick data, in order to test these stops more precisely as it would run real time.

I am aware that EnterLong and SetTrailStop do not work for secondary data series.

My question is how would I add this trailstop command to the secondary data series, if BarsInProgress == 1, while keeping everything else the same, still entering conditionally if BarsInProgress == 0 ?

If that is not possible, could you direct me where to find the position entry and exit commands for secondary data series, since the usual EnterLong and SetTrailStop only work for primary?

I will post the code below for further detail:


IsInstantiatedOnEachOptimizationIteration = true;
}
else if (State == State.Configure)
{
AddDataSeries("NQ 12-18", Data.BarsPeriodType.Tick, 1, Data.MarketDataType.Last);

}
else if (State.DataLoaded);
}

protected override void OnBarUpdate()
{
if (BarsInProgress != 0)
return;

if (CurrentBars[0] < 2)
return;

// Set 3
if (((R - (Low[0])) > (2.3 * (V - R)) )
&& ((R - (Low[0])) > (2.7 * (High[0] - (V))))
&& ((High[0] - (Low[0])) > 2.5)
&& (Low[0] < Low[1])
&& (Low[0] < Low[2])
&& (Low[0] < Low[3])
&& (Low[0] < Low[4])
&& (Low[0] < Low[5]))
{
EnterLong(Convert.ToInt32(DefaultQuantity), @"LONG");
SetStopLoss(@"LONG", CalculationMode.Ticks, 13, true);
SetProfitTarget(@"LONG", CalculationMode.Ticks, 19);
}

// Set 4
if (((High[0] - (V)) > (2.3 * (V - R)))
&& ((High[0] - (V)) > (2.7 * (R - (Low[0]))))
&& ((High[0] - (Low[0])) > 2.5)
&& (High[0] > High[1])
&& (High[0] > High[2])
&& (High[0] > High[3])
&& (High[0] > High[4])
&& (High[0] > High[5]))
{
EnterShort(Convert.ToInt32(DefaultQuantity), @"SHORT");
SetProfitTarget(@"SHORT", CalculationMode.Ticks, 19)
SetStopLoss(@"SHORT", CalculationMode.Ticks, 13, true);
}

}
}
}


This works fine, I would just like to get rid of my SetProfitTarget and SetStopLoss for both long and short conditions, and instead add a trail stop to the secondary data series to serve as an exit for both.