there will not be the same problem as with NT7, where after starting optimization,
and then closing window with that optimization - the threads are still running till the end,
which often causes next 10 minutes of calculations without any effect, after window was closed.
The threads should periodically check, if their parent window, where they were initiated,
is still open and not closed. If it was closed, the threads should stop immediately.
There is no reason run calculations/threads till the end, because user closed that window a he will never see the results. It just blocks the computer for that time consuming all CPU power till it finishes, which can take long time.
In my case, I have to wait 15 minutes, until threads in optimization finish and all CPU resources are fully free.
Comment