D3SpotterV3 On CCI_JMA_MASM freezes.

[Muratello]

Hello,
In D3SpotterV3 the method CCI_JMA_MASM is added.
At work when it(he) is chosen, the memory is strongly loaded, NT8 freezes.
Please, who is friends of programming, look and prompt as it is possible to correct.
Gratitude.

[NinjaTrader_PatrickH]

Hello Muratello,

Thank you for your note.

Did you convert the D3SpotterV3 to NinjaTrader 8? If not, have you contacted the developer of the D3SpotterV3 for NinjaTrader 8?

I look forward to your response.

[Muratello]

Did you convert the D3SpotterV3 to NinjaTrader 8?

Hello NinjaTrader_PatrickH,

Yes, is perfectly converted.

[Muratello]

I shall specify, that it is necessary to find out and to alter. NT8 freezes, when in D3SpotterV3, in Indicator Method, Is chosen CCI_JMA_MASM. The guys, see, please, what process freezes and as it can be corrected. And if will recode and place corrected D3SpotterV3 is in general It will be magnificent.
Gratitude!

[NinjaTrader_PatrickH]

Hello Muratello,

Thank you for your patience.

Are you receiving errors in your Log tab on the Control Center? Or is the entire platform freezing up?

I am seeing the following message in my Log when testing your converted indicators:

Active drawing object tag names must be unique per drawing tool type, the tag '4170' is already in use by another active drawing tool of a different type and will be ignored.

I look forward to your response.

[Muratello]

Hello Muratello,

Thank you for your patience.

Are you receiving errors in your Log tab on the Control Center? Or is the entire platform freezing up?

I am seeing the following message in my Log when testing your converted indicators:

I look forward to your response.

Hello NinjaTrader_PatrickH,
errors I have not time to look in Log tab on the Control Center, because a platform completely freezes.



Thank for your response.

Ps*:
Here there is a discussion of this problem:

http://ninjafutures.ru/threads/d3spotterv3-obnaruzhivaet-divergenciju-na-nt8.1582/page-3#post-28662

[NinjaTrader_PatrickH]

Hello Muratello,

Thank you for your response.

Please send me your log and trace files so that I may look into what occurred. You can do this by going to the Control Center-> Help-> Email Support.

Please list 'ATTN: Patrick H' in the subject line and reference this thread in the body of the email.

I look forward to your response.

[Muratello]

Hello,
There are on our forum others, more simple than D3SpotterV3, indicators Divergence for NT8? If is, please, place here reference on them.

Is grateful.

[NinjaTrader_PatrickH]

Hello Muratello,

Thank you for your post.

I may not fully understand your inquiry, are you looking for a divergence indicator for NinjaTrader 8?

I am not aware of any public indicators on the forum here for divergence in NinjaTrader 8 however, there is the MACD that comes pre-loaded in NinjaTrader 8.

Please provide additional details on your inquiry.

[Muratello]

Hello NinjaTrader_PatrickH,

Thank for your answer.

Simply has thought, if is free and more simple, than D3Spotterv3, the indicator divergence for NT8, and in its code will be possible to add algorithm CCI_JMA_MASM, it will not freeze, as D3SpotterV3 On CCI_JMA_MASM.

[Muratello]

Hello,
Please, somebody, from able to code, removes, except for CCI and CCI_JMA_MASM, others 15 algorithms and вс ё connected with them.
By search in Notepad ++, under the name others 15-ти of indicators, except for CCI and CCI_JMA_MASM, has found 50 lines. The correct removal these 50 lines for 15 indicators can, will reduce, though on slightly, will reduce outflow of memory... freezing?
It would be desirable to check up and such variant.

All built - in 17 algorithms of indicators:

CCI,
CCI_JMA_MASM,
DO,
MACD,
MACDdiff,
MACDhistOnly,
MFI,
Momentum,
ROC,
RSI,
RVI,
SMI,
StochasticsD,
StochasticsK,
StochasticsFastD,
StochasticsFastK,
StochRSI

It is necessary to remove all but CCI and CCI_JMA_MASM.

Beforehand - Great Gratitude!

[Muratello]

DivergenceInputSeriesNT8 Is identical D3SpotterV3.
It would be perfect if somebody has added in DivergenceInputSeriesNT8 alarm points, arrows(pointer), sound and textual Alerts, that would be displayed on the second panel with the indicator, as it is in D3SpotterV3.
The guys, help, please, with these nuances.
Previously - Gratitude.

[NinjaTrader_PatrickH]

Hello Muratello,

Thank you for your post.

Are you looking for the dots that the D3SpotterV3 shows? If so, I see no Draw.Dot() commands in your code.

Please provide further detail on this matter.

[Muratello]

Hello NinjaTrader_PatrickH,
I thank for the answer.
Unfortunately, yet I do not own programming, on this I ask able to code, to add these objects in a code, what on to see divergence on the panel of the indicator. The top panel with bars usually I close - for WCCI it is not necessary.

DivergenceInputSeriesNT8 Does not freeze on algorithm CCI_JMA_MASM, as it occurs with D3SpotterV3. On this if to add in DivergenceInputSeriesNT8 display of points, arrows, lines divergence, on the second panel with the indicator, a problem lifted in this theme, I think, would be solved.

Is necessary divergence of the price only with CCI and CCI_JMA_MASM

[aligator]

Hello Muratello,

Thank you for your post.

Are you looking for the dots that the D3SpotterV3 shows? If so, I see no Draw.Dot() commands in your code.

Please provide further detail on this matter.

PatrickH, Hi.

The above indicator is the same as my NT8 conversion of DivergenceInputSeries that I posted yesterday in Downloads section. The indicator draws dots at swing points and b/s arrows at divergence points. I did not change much of the original NT7 version.

Perhaps to help you understand what he is asking for:

It seems like he is using the WCCI indicator as InputSeries, and he wants this Divergence indicator to plot the indicator used as InputSeries and also draw arrows inside the indicator panel (WCCI in his case).

The DivergenceInputSeriesNT8 code can be modified to plot the InputSeries indicator used in the lower panel and draw arrows on indicator too, and that is what he want, I think.

Cheers!