Volumetric Chart Style Not Showing

[aligator]

Dear Support,

As seen in the attached screenshot, Voumetric chart style shows up on the list in Data Series window. But when selected, it will not plot.

Also, as I print the list of Chart Styles in the Output window the Voumetric is not listed. Is there a conflict here with the custom chart styles Gradient Bar and Equivolume?

What is the location designation for the Volumetric? Do I need to change the location numbers for the two custom chart styles?

Many Thanks.

[NinjaTrader_ChrisL]

Hello. Thanks for the post.

If the number in your output on the right side of the chart style name is the chart style's enumeration value then those values are ok to use. All features of the OrderFlow update are closed source The Volumetric style can only be applied to the Volumetric bar type. If you are applying that chart style to a different bar type it will not plot.

Info on the ChartStyleType enumeration value can be found here:

https://ninjatrader.com/support/helpGuides/nt8/en-us/?chartstyletype.htm

Please let us know if we may be of any further assistance.

[aligator]

Hello. Thanks for the post.

If the number in your output on the right side of the chart style name is the chart style's enumeration value then those values are ok to use. All features of the OrderFlow update are closed source The Volumetric style can only be applied to the Volumetric bar type. If you are applying that chart style to a different bar type it will not plot.

Info on the ChartStyleType enumeration value can be found here:

https://ninjatrader.com/support/helpGuides/nt8/en-us/?chartstyletype.htm

Please let us know if we may be of any further assistance.

Thanks,

Yes, those are enumeration values, so I assume there is no conflicts. However, the Volumetric Chart Style does not print to Output (see post #1) and there is no Volumetric bar type listed to use with the chart style.

[NinjaTrader_ChrisL]

Hello. Thanks for the reply.

Please send me your log and trace files to*platformsupport[at]ninjatrader[dot]com.*
You can do this by going to the Control Center-> Help-> Mail to Platform Support.
Please reference the following in the email body:*ATTN ChrisL <paste this forum thread link here>

I look forward to your reply.